Kenwood KDC-MP172U Manual De Instrucciones página 16

INSTALLATION/CONNECTION
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket
and secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage the unit.
16
ENGLISH
Do the required wiring.
( 17)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys into the holes on both sides of the trim
plate, then pull it out.
3 Insert the extraction keys deeply into the slots on each side, then follow the arrows
as shown on the illustration.
Part list for installation
(A) Faceplate (B) Trim plate
(D) Wiring harness (E) Extraction key
(C) Mounting sleeve
(F) Screws