Hardware Installation - Velleman VCC6 Manual Del Usuario

• supports remote surveillance and PTZ control through web browser, supports dynamic domain
name (DDNS)
• remote playback function
• configurable auto reboot, watchdog function and PC deadlock prevention
• auto mail notification: sends you a picture of the movement perceived by each camera
• mobile phone remote surveillance (Symbian, WinCE, Iphone, Android phone)
• manual only available in English !
VCC6 only
• max. display/recording rate of 25fps (PAL) / 30fps (NTSC)
• min. system requirements
operating system: Windows 2000/XP/Vista/Win7/64-bit
o
CPU: Intel Pentium III 800
o
RAM: 256MB
o
HDD: >250GB
o
VGA: nVidia Geforce II MX320 32M
o
VCC7 only
• max. display/recording rate of 100fps (PAL) / 120fps (NTSC)
• min. system requirements
operating system: Windows 2000(SP4)/XP(SP2)/Vista/Win7/64-bit
o
CPU: Intel Pentium IV 2.8GHz
o
RAM: 512MB
o
HDD: >250GB
o
VGA: nVidia Geforce IV MX440 64M
o
5. Overview
Refer to the illustration on page 2 of this manual.
Alarm port
Pin #
1
2
3
4
5
6
7
8
9
10

6. Hardware installation

• Verify whether your computer complies with the minimum system requirements. Install
Microsoft DirectX version 9.0 (or higher) before installing the DVR card
• Refer to the user manual of your computer for information on how to open the housing and
where the 32-bit PCI card slots are located. Make sure to switch off the computer and
disconnect it from the mains before opening the housing.
• Insert the DVR card into a free 32-bit PCI slot. Use an antistatic wrist strap.
• Install the cover with the DB25F connector next to the DVR card and connect the connector at
the end of the ribbon cable to the socket on the DVR card. This connector fits only one way,
do not force.
• When using an additional audio input device (not incl.), install it and connect it to the
motherboard when necessary. Refer to the user manual of the audio device.
• Close the housing of the computer.
• Do not connect the cameras yet.
22.07.2010
VCC6/VCC7
DB25F
Definition
Pin #
25 5V
21 ALARM_COM
23 ALARM_NC
1 ALARM_IN1
22 ALARM_NO
2 ALARM_IN2
24 GND
3 ALARM_IN3
- GND
4 ALARM_IN4
4
Function
Power Source (5V)
Alarm COM
Alarm Normal Close
Alarm Input 1
Alarm Normal Open
Alarm Input 2
Ground
Alarm Input 3
Ground
Alarm Input 4
©Velleman nv