Radio Operation; Tuning To A Radio Station - Trevi HCX 1200 BT Manual De Uso

ENGLISH
This unit has a ID3 system, if the mp3 file is"ID3" format, it will automatically search the
information of "TITLE NAME" "ARTIST NAME" and "ALBUM NAME" to show on the display. To
turn off the show tag system, press and hold the EQ/ID3 button and the unit will back to normal
display.
DISCO LIGHT
To change the disco light effects, press the DISCO-LIGHT button on unit or remote control. You
can choose from five different modes.
To disable the disco light, press the DISCO-LIGHT button on unit or remote control until the
display reads "OFF".

RADIO OPERATION

TUNING TO A RADIO STATION

1. Press the FUNCTION button on unit or remote control to select the RADIO FUNCTION, this
unit is designed for FM ONLY.
2. Tune to the desired station by pressing the TUN.+/TUN.- button on unit or remote control, the
station frequency will show on the display. Example: FM87.80 MHz. If the radio receive
Stereo signal, "STEREO" indicator will show on the display.
3. Rotate the VOLUME dial on unit or VOL.+/VOL.- key on remote control to adjust the volume
to a comfortable level.
4. Extend FM ANTENNA to its full length and gently move the unit back and forth to get the best
reception, or place the unit in an open location.
5. To turn off the radio, press the FUNCTION button on unit or remote control to switch to other
functions or press POWER button to turn off the unit.
AUTO PRESET MEMORY / SCAN
To search for and automatically save stations to preset memory, press the PLAY/PAUSE
button on unit or remote control. Any station with a strong enough signal will be saved to preset
memory. After the unit is finished scanning, the unit will automatically tune to preset station
number 1 (P01). To tune to the next preset station, press FOLD.+/+10/M.+ button on unit or
remote control. To tune to the previous station, press FOLD.-/-10/M.- button on unit or remote
control.
MANUAL PRESET MEMORY OPERATION
You may choose stations to save in preset memory so that you can tune directly to these
stations quickly.
1. Press the PROG./P-MODE/M. button on unit or remote control . "P01 " will flash on the
display. Press the TUN.+ or TUN.- button on unit or remote control to select the desired
station.
2.Press the PROG./P-MODE /M. button on unit or remote control to choose the position you
want to store, then press the PROG./P-MODE/M. button on unit or remote control again to
enter.
3. To save another station, repeat steps (1) & (2). You may save up to 30 FM stations.
To tune to preset stations, press FOLD.+/+10/M.+ or FOLD.-/-10/M.- button on unit or remote
control.
12
HCX 1200 BT