Bluetooth Operation; Technical Features - Trevi SB 5010TV Guia Del Usuario

ENGLISH
INPUT OPTICAL
1. Use a digital optical cable to connect the OPTICAL (10) to optical digital output of the TV or other source device.
Note: on some TV or devices must be enabled the digital optical output.
2. Turn on the unit and press the SOURCE button (2) to select the input OPTICAL.
3. Adjust the volume using the Vol + and Vol-.
Note: if there is no sound from the sound base make sure the audio setting of your source player is set to optical PCM.

BLUETOOTH OPERATION

1. Turn on the unit and press the SOURCE button (2) to select the BLUETOOTH function (BT on display).
2. Press and hold the PAIR button, the system automatically enters search.
3. Activate the Bluetooth feature on the external device.
4. Initiate a search for devices. After select the "SB 5010 TV".
5. Enter the password "0000" if required.
6. Press to start playing and the keys 9 or : to select tracks.
/
7. Press and hold the PAIR button to make a new pairing operation.
FUNCTION EQUALIZER
The base has a digital sound system equalization pre-set, press the EQ (8) during playback to select the dynamic sound that best fits the music style:
MUSIC, TV, MOVIE.
TROUBLESHOOTING
If the Sound Bar does not work properly, check this short list before taking it to a TREVI authorised service centre.
In any case, do not try to repair the device, this will void the warranty. Only TREVI authorised service centres are authorised to perform operations
on this product.
No Sound
 Check that the MUTE function is not activated.
 Check that the correct input has been selected.
 Check and adjust the volume of the Sound Base and the TV (or the device connected).
The Sound Bar does not turn on or turns off automatically
 Check that the power cable is correctly inserted.
 If the Sound Base does not receive any signal for some time it automatically turns to standby mode.
The remote control does not work
Replace the battery

The device does not react to any operation
 Disconnect the power cable from the device for 30 seconds to reset it.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing
 Ensure that the unit is switched on.
 Ensure that the Bluetooth function is activated on your Bluetooth device.

TECHNICAL FEATURES

GENERAL FEATURES
Power supply:
Consunption:
Maximum load:
Maximum output power:
Sound Bar size:
Weight
. ............ AC 220/240V 50/60Hz
. ..........18W Max/Stand-By<1W
. ........................................30Kg
. .........................................60W
. .......................525x85x310mm
. .......................................4.3Kg
(Not included)
7
SB 5010TV