Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.3 Setting the Skimmer function
See section 2.2 for an introduction to this function
• Press and hold DISP/FUNC for three seconds
All three LEDs will blink and the screen will display
"ConF"
• Press DISP/FUNC repeatedly until 'SFO.15' is
displayed on screen: this is the default Skimmer
time (in minutes)
• Press the up / down buttons to set the desired
value (0 to 30 minutes)
• Press DISP/FUNC: the screen will display "St 1hr"
- this is the default Skimmer cycle period
• Press the up / down buttons to set the Skimmer
cycle period to 1hr, 2hrs or 3hrs
• Press DISP/FUNC: the screen will display "S2800"
- this is the default speed of the Skimmer function
(rpm)
• Press the up/down buttons to display the desired
speed (600 to 3000 rpm)
• Press RUN/STOP to exit and save
The display will show the current speed or StoP
Note: To deactivate the Skimmer and set the time to
zero - display reads "SFoFF"
4.4 Restoring the settings
To restore the default settings and erase the Timer mode settings, do the following:
• Press and hold DISP/FUNC for three seconds
All three LEDs will blink and the screen will display
"ConF"
• Press DISP/FUNC repeatedly until the screen
displays the message 'Init'
• Press and hold the 'up' button for 3 seconds. The
screen will read "donE" once the reset is complete
• The pump will restart automatically
Priming
Pr
o___
Units
s
rpm
Default
240
3000
Mini
600
0 (
oFF)
Maxi
300
3000
Page 8 of 12
Reminder: default settings and their value ranges
Speed preset buttons
V1
V2
rpm
rpm
1500
2400
600
600
3000
3000
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
>3s
x n
SF000
>3s
x n
>3s
Skimmer function
SF
St
V3
rpm
min.
h
3000
15
1
600
1 ...
0 (
oFF
)
3000
30
... 3
Pump
ConF
SfO15
.
SFO20
.
St1h
St2h
S2800
S2680
/
1640
StoP
SFoFF
ConF
Init
dOnE
Timer function
S___
t0
rpm
hh-mm
rpm
2800
06-00
2400
600
00-00
—
3000
24-00
—
Pr
t1 _ t5
hh-mm
rpm
0
oFF
00-00
0/ 600
24-00
3000
Rev B
Tabla de contenido
