Setting Up Your Loop; Attaching Loop To The Camera - Rosco LitePad Loop 1008 Manual Usuario

Setting Up Your Loop

1) Attach the Mounting Assembly to your camera by
screwing the Knob [11] into the threaded socket in the
bottom of the camera. Align the camera so the lens is
parallel with the L-Bracket [12]. Tighten the Knob to
ensure the camera will not move during use.
2) Attach the Loop to the L-Bracket [12] by bringing the
Magnets [3] into contact with the Magnet Plate [13].

Attaching Loop to the Camera

B
9