Using Optional Accessories Aa Battery Holder - Rosco LitePad Loop 1008 Manual Usuario

Using Optional Accessories
ATTACHING AA BATTERY HOLDER
To attach the optional AA
Battery Holder Bracket:
1. Unscrew the two cap
screws underneath the
Sled as show in Fig.
10.1.
D
2. Position the Battery
Mounting Adapter under
the sled as depicted in
Fig. 10.2 and fasten with
the two cap screws.
3. With the AA Battery
Holder already installed
in the AA Battery
Bracket, tighten the
thumb screw on the
Battery Bracket onto the
Battery Mounting
Adapter as shown in Fig.
10.3.
4. Plug the AA Battery
Holder power cord into
the LitePad Loop.
NOTE: You must have the 4" L-Bracket to use the
14
Loop AA Battery Kit. See page 16.
AA Battery Holder
AA Battery Bracket
with AA Battery
Pack inside.
Fig. 10.1
Battery Mounting
Adapter
Fig. 10.2
Fig. 10.3