Light Stand Plate - Rosco LitePad Loop 1008 Manual Usuario

Using Optional Accessories
USING THE LIGHT STAND PLATE
Although the LitePad Loop has been designed primarily
for use on a camera, it may also be used as
an off camera light. To change the lighting
setup quickly, simply remove the Loop from
the Mounting Assembly and attach it via
magnets to the Light Stand Plate (in the Pro
Kit or sold separately). The Light Stand
Plate may then be mounted to the LitePad
D
Swivel Arm which can be further attached to
almost any light stand used in photo/video
production.
Fig. 18.1
Attaching the Stand Plate to the Swivel
Arm (sold separately)
To attach the LitePad Loop to a light stand, screw the Light
Stand Plate to the LitePad Swivel Arm (sold separately - see
page 23) - Fig. 18.1. The Swivel Arm can attach to a typical
light stand. Then put the flat side of the Stand Plate in contact
18
with the LitePad Loop magnets.

Light Stand Plate

Fig. 18.2
Put the magnets on the Loop in contact
with the Stand Plate
Light Stand Plate