Support; Troubleshooting - Rosco LitePad Loop 1008 Manual Usuario

Support

My LitePad Loop won't turn on.
Ensure that the transformer is firmly plugged in to a functional
power outlet and the DC power cable is firmly seated in the
LitePad Loop. Check that the On/Off switch is turned to On
position. If problem persists, contact Rosco.
I've lost one of my Thumb Screws.
Replacement screws are available in packs of four. Rosco
part number: 2912 0002 1032
My LitePad Loop moves when I turn my camera
sideways.
Retighten the knob screwed into the bottom of the camera. To
adjust Loop's position, unscrew the knob, reposition the
camera and tighten the knob. If the problem persists, contact
Rosco.
I can't get my LitePad Loop the correct distance
G
from my lens.
LitePad Loop comes standard with a 2" L-Bracket and 4"
Rods. To extend the Loop further than this combination
allows, optional 4" L-Bracket and/or 8" rods are available.
I want to change to color of my LitePad Loop.
Rosco offers a Color Filter Pack which includes color
correction and cosmetic filters. Rosco part number:
2912 0000 0008
If you problem cannot be solved by this manual, please contact a Rosco office.
Stamford, Glendale, London, Toronto, Madrid, São Paulo and Sydney
24
Rosco Laboratories
www.rosco.com
[email protected]

Troubleshooting