Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Select the desired function:
1. Fire (4d)
2. Fan (4a) (without heating)
3. Half power 900w (4a + 4b)
4. Full power 1800w (4a + 4b + 4c)
5. Heat and Fire (4a + 4b + 4c + 4d)
•
Fan function is necessary to activate heat functions. Without fan the heating can not run.
•
Adjust light of fire by rotating the fire adjustable switch (2) clockwise until desired intensity.
•
To adjust the permanent temperature:
1. Turn the thermostat (3) clockwise to the biggest point.
2. When the room temperature goes up to be comfortable then turn the switch (3) in an
anticlockwise to break point and keep the button position.
3. The function can keep necessary room temperature and also save energy.
LIGHT EXCHANGE (SEE FOLLOWING PICTURE)
•
Loosen the four screws at the front of the flame effect element
•
Lift up the log decoration. Two bulbs are located under fuel bed.
•
Replace the bulbs with a 25W type
•
To reassemble, follow previous instructions in reverse order.
MAINTENANCE
•
Before cleaning or maintenance operation, switch off and unplug the appliance. Ensure it is
perfectly cooled.
•
To remove the dust, wipe the appliance with a cloth
•
Never use abrasives or detergents
-11-
Tabla de contenido
