Alarm Function; Sleep Function; System Settings - Trevi TT 1072 DAB Manual De Usuario

ENGLISH
REGISTRATION FROM OTHER SOURCES
Note: make sure that the record enabling tab is present otherwise it will not be possible to record the cassette.
1. Insert the cassette into the compartment.
2. Press the REC (16) button to start recording.
3. Activate playback of the desired source (Radio, USB / SD player, Bluetooth, AUX IN, turntable, CD).
4. Use the PAUSE button (21) to momentarily stop the recording, press it again to resume it.
5. Press the STOP / EJECT button (20) to stop recording permanently.
HEADPHONES
1. Insert the headphones into the jack (3). The speakers will be turned off.
2. Start the desired playback and adjust the volume.
LINE OUT
The LINE OUT output allows you to connect the unit to an external amplification system.
Connect an RCA cable (not supplied) to sockets 32-33 and the other end to the external system. Start the desired playback.

ALARM FUNCTION

This appliance is equipped with an alarm function; It is possible to set up to two alarms.
1. With the appliance in standby, press the MENU button (12) for a long time. Move within the menus using the keys (27) or (26)
and confirm with the SELECT key (25).
2. The indication SYSTEM appears on the display, confirm with the SELECT button. Select the ALARM item and confirm.
3. Select ALARM1 SETUP or ALARM2 SETUP .
4. Select the activation (ON) of the alarm (alarm deactivated = OFF).
5. Set the alarm activation time (ON TIME).
6. Set the duration of the alarm (DURATION).
7. Set the source to be played (buzzer = ringer, if the radio is selected as the source, you are asked which station to use, if the
last listened to LAST LISTENED or one of those memorized).
8. Set the activation frequency DAILY (every day), ONCE (once), WEEKENDS (Saturday and Sunday), WEEKDAYS (from Monday
to Friday). Confirm / set the alarm date if required.
9. Set the alarm playback volume.
At the end, the set alarm will be saved and the icon of an alarm with active alarm appears. If the second alarm alarm is also set,
two icons will be present.
With the alarm active, press the SNOOZE button on the remote control to temporarily silence the alarm that will sound again after 9
minutes (the remaining time is shown on the display); press the SLEEP button to deactivate the alarm permanently.

SLEEP FUNCTION

It is possible to activate the automatic switch-off of the unit (standby) after a certain time.
1. Press the SLEEP button (15) to set the desired automatic switch-off time; by pressing the button several times it is possible to
select between 90, 60, 30, 15 and OFF.
2. When the function is active, the "ZZZ" icon appears on the display.

SYSTEM SETTINGS

1. Long press the MENU button (12). Move within the menus using the keys (27) or (26) and confirm with the SELECT key (25).
2. Select SYSTEM and confirm with the SELECT button.
3. Various menu items are available:
Alarm: it is possible to set the alarm alarm function (see the relative chapter for the settings).
Time: it is possible to set the current date / time (see the relevant chapter for the settings).
Backlight: it is possible to set the time of full display ignition (Timeout), the brightness level of the display when
active (On level) and the brightness level when the display is at rest (Dim level).
Language: it is possible to set a different language for the menu.
Factory reset: it is possible to restore the settings to the factory values.
Software upgrade: menu reserved for technical assistance centers, do not use.
SW version: shows the current software version.
‘–‡…– ›‘—” ”‡…‘”†‹‰ ˆ”‘ ƒ……‹†‡–
––‡ ‹• Š‡Ž† ™‹–Š –Š‡ ”‡…‘”†‡† •‹†‡
‹ŽŽ „‡ ˆ‘—† ‘ –Š‡ Ž‡ˆ– ”‡ƒ” ‘ˆ –Š‡
TT 1072 DAB
17