AEG SANTO 71330-18 DT Instrucciones De Uso página 29

- Remove the upper plastic plug of
the freezer door and reinsert on the
opposite side.
- Remove the upper plastic plug of
the refrigerator door and reinsert on
G
the opposite side.
- Unscrew the upper hinge pivot (G)
of the refrigerator and rescrew it on
the opposite side.
- Remove with a tool the cover (e)
unscrew the lower hinge pivot (F)
and rescrew on the opposite side
- Refit the cover (e) on the opposite
side.
- Insert the middle hinge pivot into
hole on the left of the refrigerator
door.
- Insert the refrigerator door on the
lower hinge pivot (f) .
- Insert the freezer door on the upper
hinge pivot and tilt slightly the doors
and insert the middle hinge pivot
into the hole on the left side of the
freezer door.
- Opening the doors, fix the middle
hinge on the left side with two
screws. Do not forget the plastic spa-
cer that must be placed under the
middle hinge (H).
Pay attention that the border of the
doors are parallel to the top border.
- Unscrew the handles. Refit them on
the opposite side after having pier-
D162/a
cing the plugs with a punch. Cover
the holes left open with the plugs
contained in the documentation
pack.
Reposition, level the appliance and
connect it to the mains socket.
29