Tabla de contenido
ENGLISH
1. PARTS AND COMPONENTS
1.
Water tank cover
2. Water tank
3. Control panel
4. Milk tank release button
5. Milk froth knob
6. Milk tank cover
7.
Milk tank's nozzle lever
8. Milk tank's nozzle
9. Milk tank
10. Drip tray
11. Removable grid
12. Portafilter
13. Fold-down cup support
14. Coffee spout
15. Cup warmer
16. Power button
17. Double espresso
18. Red light indicator
19. Latte macchiato
20. Auto-cleaning
21. Milk froth
22. Yellow light indicator
23. Cappuccino
24. Espresso
25. Filter for 1 coffee
26. Filter for 2 coffees
27. Coffee spoon
2. BEFORE USE
Warning: Clean the product before using it for the first time to remove all possible manufacturing
residues. See the "Cleaning and maintenance" section at the end of this instruction manual.
1.
Take the product out of the box and remove all packaging materials.
2. Wipe down the device with a clean, soft dampened cloth.
3. Rinse the water tank (1), the milk tank (9), the portafilter (12), both filters, the drip tray (10),
the cover (11) and the spoon with soapy water.
4. Place the device on a flat, stable and safe surface.
34
5. Completely unwind the mains cable and plug it into a properly installed plug socket that
is easily accessible.
6. Prepare a test coffee with coffee powder in order to make sure all manufacturing residues
inside the water system are removed. Repeat this step 2 times.
Warning: a slight odour and smoke might appear when operating the device for the first time.
This is due to manufacturing material residues and does not affect the appliance's operating.
3. OPERATION
Drip tray
The drip tray is designed to collect the coffee which drips from the coffee spout or the milk
from the milk tank's nozzle.
Note: always remove or insert the drip tray when the milk tank is not inserted in the device.
Place the removable grid (11) on the drip tray.
Use the guides on the bottom part of the device to slide the drip tray into its correct position.
Water tank
Open the water tank lid (1).
Take out the water tank (2) by the handle.
Pour water into the water tank without exceeding the MAX mark.
Reinsert the water tank and flip the handle down. Make sure that the water tank fits correctly.
Close the water tank lid.
Note: If the water is not used within two days, pour away the remaining water and refill the
water tank before you use it again.
Milk tank
Remove the milk tank from the device by pressing the release button (4) and pulling the milk
tank to the side at the same time.
Remove the milk tank cover (6) from the milk tank (9) by pressing the release button on the
milk tank cover's side.
Pour milk into the milk tank without exceeding the MAX mark.
Close the milk tank with its cover and make sure it fits properly.
Insert the milk tank back in the device until a little "click" is heard. Make sure it is in its correct
position.
Note: If the milk is not used within two days, pour away the remaining water and refill the
water tank before you use it again.
ESPAÑOL
POWER INSTANT-CCINO 20
35
Tabla de contenido
