Parts And Components; Before Use - cecotec Cumbia POWER MATIC-CCINO 9000 SERIE Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Drip tray
2. Coffee spout
3. Milk frother (cappuccinatore)
4. Water tank
5. Left-side door
6. Power cord
7. Control panel
8. Funnel lid
9. Funnel for ground coffee
10. Bean tank
11. Right-side door
12. Brewing unit
13. Waste tank
14. Coffee grinder knob
15. On/off button
16. Power button
17. Milk tank
Control panel
Fig. 2

2. BEFORE USE

Take the product out of the box and remove all packaging material.
Make sure all the components are included, and if not, contact immediately the official
Technical Support Service of Cecotec.
Remove the water tank, fill it up with fresh water.
Fill the coffee bean tank with coffee beans.
Insert the power plug into the wall socket.
Press the power switch on the back of the machine once or twice if the screen is blank.
Place a cup under the drink dispenser.
Press the power button once or twice if the screen is white.
Allow the machine to warm up while performing the self-cleaning cycle.
The machine will enter standby mode and then will be ready for use.
Note: It is suggested to use bottled water in order to achieve optimal taste of coffee.
(Fig. 3)
50