Maintenance And Cleaning - Zuzi 4201/50 Manual De Instrucciones

Figure 15
Figure 16
Security
The spectrophotometer must be used by previously qualified staff that knows how the equipment works thanks
to the user manual.
You should put the spectrophotometer on top of a horizontal, plane, stable table, having a safety area of at least
30 cm per side.
Do not place the spectrophotometer near any warm supply (burners, blowlamps, etc), nor expose it directly to the
sun. Avoid vibrations, dust and dry environments.
During operation dangerous materials such as flammable or pathological substances must be out of the safety
area.
When you are not using the spectrophotometer for a long period of time please make sure it is unplugged in order
to avoid possible accidents.
It is essential to have the equipment switched off and unplugged from the net before cleaning, checking compo-
nents or replacing any piece (e.g. replacement of a fuse).
Never try to repair the spectrophotometer by yourself, since you will lose the warranty and may provoke dama-
ges to the general operating system or the electrical installation, as well as injuries to the people that usually han-
dle the equipment (burns, hurts...).
Try not to spill any liquid on the control panel, though it is properly insulated. In case you have any doubts do
please immediately unplug the spectrophotometer (see Maintenance).
Made under the European regulations for electrical security, electromagnetic compatibility and security on machi-
nes.

5. MAINTENANCE AND CLEANING

To get the best results and a higher duration of this equipment it is essential to follow the processes of use.
Note: All the processes of use mentioned below will not have any value unless you keep a continued and careful
maintenance.
Revision 2 November-2010
100.0% T
Instruction manual 54201050 Page. 21