Periodic Maintenance Chart - Mi-T-M Corporation GEN-3000-1MH0 Manual Del Operador

mAInTenAnCe

PERIODIC MAINTENANCE CHART:

To ensure satisfactory operation over an extended
period of time, an engine requires normal maintenance
at regular intervals. The Periodic Maintenance Chart
below shows periodic inspection and maintenance items
and suitable intervals. The bullet mark designates that
the corresponding item should be performed at that
interval.
NOTE: Some adjustments require the use of special tools
or other equipment. An electronic tachometer will
facilitate setting idle and running speeds.
Check fuel
Check engine oil
Check for loose or lost nuts and bolts
Check for leaks
Check cylinder and head fins for
dust and dirt
Check battery electrolyte level
Check fuel lines (replace if necessary)
Clean air cleaner foam element (**)
Tighten nuts and bolts (*)
Change engine oil (*)
Clean fuel filter
Replace air cleaner paper element (**)
Clean dust and dirt from
cylinder and cylinder head fins (**)
Clean and regap spark plug
Add fuel stabilizer
Run unit dry
* Perform these operations after the first 5 hours of use, then at the recommended intervals.
** Service more frequently under dusty conditions.
NOTE: These items must be performed with the proper tools. See your Mi-T-M Customer Service Representative for
service, unless you have the proper equipment and mechanical proficiency.
Operator's Manual
Service
Daily Every
25hrs.
•
•
•
•
•
•
•
•
Every Every
00 hrs. 200 hrs.
•
•
•
•
•
•
Before
Storage
•
•
29