Button Max/Min; Auto-Off - Sonel CMP-200F Manual De Uso

6.3 Button MAX/MIN

 To enable the mode, press MAX/MIN.
 Press MAX/MIN button to switch between the extreme values of
the on-going measurement.
 Symbol MAX symbol – the meter displays the highest value
out of existing measurement readings.
 MIN symbol – the meter displays the lowest value out of exist-
ing measurement readings.
 To disable the function, press and hold MAX/MIN button for ap-
prox. 1 second or turn the rotary switch.
 If the reading is outside the measurement range, symbol
OL is displayed.
 The button is not active for voltage and capacitance
measurement, as well as continuity and diode test.

6.4 Auto-Off

The meter automatically shuts off after 15 minutes of user inac-
tivity. Symbol
tivated function.
Auto-off function may be temporarily disabled. For this purpose:
 set the rotary switch at OFF position,
 press and hold MODE button,
 set the rotary switch at the desired measuring function,
 wait until the meter reaches the measurement readiness,
 release MODE button. When the automatic shutdown is deac-
tivated, the display does not show icon
Each pass of the rotary switch through "OFF" position with
non-pressed MODE button, will activate again the Auto-Off
function.
in the upper left corner of the display indicates ac-
CMP-200F – USER MANUAL
.
51