Safety Symbols - Sonel CMP-200F Manual De Uso

WARNING
 Never start the measurements if you have wet or
damp hands.
 Do not perform measurements in explosive atmos-
phere (e.g. in the presence of flammable gases, va-
pours, dusts, etc.). Using the meter in such condi-
tions may result in sparking and cause an explosion.
Function
200 A AC
V DC, V AC
V DC, V AC (Low Z)
Resistance, continuity, diode
test, capacitance

2.2 Safety symbols

This symbol located near another symbol or terminal,
indicates that the user should read the further information
contained in the manual.
This symbol located near the terminal, indicates that in
normal use there is a possibility of dangerous voltages.
Protection class II – double insulation
Terminals with this marking cannot be connected to a
circuit where the voltage to ground exceeds the maximum
safe voltage of the device.
The limit values of the input signal
CMP-200F – USER MANUAL
The maximum
input value
200 A AC
1000 V DC/AC RMS
600 V DC/AC RMS
300 V DC/AC RMS
37