Panasonic SC-EN36 Instrucciones De Funcionamiento página 7

The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function on/off.
• Each time you press the button:
OFF (Canceled)
g To check the remaining time
The play timer and sleep timer can be used together. The sleep timer
always has priority. Be sure not to overlap timer settings.
The remote control and main unit are factory-set to "REMOTE 1" mode.
If your remote control affects other equipment during operation, you can
switch to operate in "REMOTE 2" mode.
To switch to "REMOTE 2" mode
 (While pressing and holding [MUSIC P.] on the main unit)
Press and hold [2] until "REMOTE 2" appears on the main unit
display.
 Press and hold [ENTER] and [2] for at least 2 seconds.
The main unit and remote control are now set to operate in "REMOTE
2" mode.
Press [SLEEP] once
You can set the timer to come on at a certain time to wake you up.
Preparation:
• Turn the unit on and set the clock.
• Prepare the music source (disc, radio or music port) and set the
volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
zPLAY
 Within 5 seconds, press [u, 2] or [i, 1]
to set the starting time.
 Press [CLOCK/TIMER] to confirm.
 Repeat steps 2 and 3 to set the finishing
time.
To activate the timer
 Press [zPLAY] to turn on the timer.
 Press [^] to turn off the unit.
To
Change the settings
Change the source or volume
Check the settings (when the
unit is on or in standby mode)
Cancel
Original display
Action
Repeat steps 1 to 4 and 6.
 Press [zPLAY] to clear zPLAY
indicator from the display.
 Make changes to the source or
volume.
 Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to
select zPLAY.
Press [zPLAY] to clear the timer
indicator from the display.
7