Schumacher INSTANT POWER XP400 Manual Del Usuario página 12

Appliance Type
Cell Phone
Fluorescent Light
Radios, Fan
depth Finder
Camcorder, vCR
Electrical Tool
Electrical Cooler
Car vacuum, Air
Compressor
NOTE: Estimated run-times. Actual time may vary. Times are based on the
internal battery being fully charged
8.3 Using the USB Port (Models XP500 and XP750C)
The USB port provides up to 500mA at 5v dC.
1. Ensure the battery clips are securely clipped on the storage holders.
2. Turn the Instant Power™ On/Off switch to the ON (clockwise) position.
3. Plug the device into the USB port on the front panel.
4. Turn the USB device on.
5. Reverse these steps when finished using the USB port.
6. Charge the Instant Power™ as soon as possible after using the USB port.
8.4 Using the Built-In Light
1. Position the Instant Power™ on a flat, stable surface near the intended
work area.
2. Ensure the battery clips are securely clipped on the storage holders.
3. Toggle the Work Light switch to the ON position.
4. The Instant Power™ light will turn on and illuminate your work area.
5. Toggle the Work Light switch to the OFF position when the work is
completed.
6. Charge the Instant Power™ as soon as possible after using the built-in
light.
NOTE: With a fully charged internal battery, the built-in light on the XP400
should provide approximately 50 hours of continuous, useful light, the built-in
light on the XP500 should provide approximately 70 hours of continuous,
useful light and the built-in light on the XP750C should provide approximately
120 hours of continuous, useful light.
Estimated
Estimated
Usage Time
Wattage
4 watts
4 watts
9 watts 6.7 hours
9 watts 6.7 hours
15 watts
24 watts 2.5 hours
48 watts 1.3 hours
80 watts 0.8 hours
Estimated
Usage Time
XP400
15 hours
15 hours
9.3 hours
9.3 hours
4 hours 5.6 hours
3.5 hours
1.8 hours
1.1 hours
8
• •
Estimated
Usage Time
XP500
21 hours 36 hours
21 hours 36 hours
16 hours
16 hours
9.6 hours
1.8 hours
XP750C
6 hours
3 hours