Faber GALILEO SMART Manual Del Usuario página 17

7.6 Installer Menu (Hob power settings)
When first connecting to the domestic power supply, the installer must set the power of the
hob cooking areas based on the actual abilities and capacity of the power supply itself.
If this is not necessary, the hob can be turned on directly using
operations below to access the menu.
When the power is first turned on, the symbol
Continuing to hold
anticlockwise direction, starting from the one on the right.
A beep sounds each time you press, and when button
Digit will alternately display
Digit will display .
Press Digit and number 8 on the power bar to access the settings menu. The operation is
confirmed by the fact that the display changes from (
We are now in the hob power settings menu.
Press Digit and select one of the values displayed in the power bar (0-1-2-3) following the
table provided below.
Once the correct value has been entered, confirm by pressing and holding
confirmation is received.
, press the 4 Digits for the cooking areas (
and .
flashes.
) one at a time in an
is released it shows:
and ) to ( and
Kw
7.4 Kw
4.5 Kw
3.5 Kw
2.8 Kw
, otherwise, follow the
).
until
17