SKF TKBA 10 Instrucciones De Uso página 13

Step 1:
Correct vertical angle misalignment by shimming the moveable machine
using stainless steel shims such as SKF TMAS shims. Correction of this
angular misalignment can be observed on the relector unit.
Figure 6 Vertical angle misalignment as found and after correction
Step 2:
Correct horizontal angle misalignment by adjusting the moveable machine
laterally. This can be viewed on the laser unit during adjustment.
Figure 7 Horizontal angle misalignment as found and after correction
Step 3:
Correct parallel misalignment (Offset) by adjusting the moveable pulley or
machine axially.
This correction can be observed on the relector unit.
SKF TKBA 10 & 20 11