Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Height Adjustment Handle Assembly
4. Secure the assembled Wide drum Sander to the accessory workstand
an adequately stable workbench or stand before operating the machine.
WARNING: To prevent possible serious personal injury, always disconnect the
Wide Drum Sander from the power source before servicing the unit or
changing the abrasive strips.
WARNING: For your own safety, never connect the plug to a source outlet
until you have read and understand the safety and operating instructions for
your Wide Drum Sander.
WARNING: Make certain that the switch is in the OFF position before inserting
the plug into a power source. Do not connect the power until you are ready to
operate the machine. Be sure that the bolts are firmly tightened before
connecting to power source.
CAUTION: The surface to which the Wide Drum Sander is mounted must not
be warped or uneven. Mounting the base to a warped suface will cause
distortion and poor operation.
ADJUSTMENTS
Your Wide Drum Sander was aligned and completely adjusted during assembly.
１０
EN
Figure 5
or to
MS3140 DRUM SANDER
Tabla de contenido
