Final Recommendations - Telcoma Automations TANGO 230 Manual De Uso

GB
AERIAL
To improve the reception and range of the remote controls, installation of
a suitable aerial is recommended.
In order to maximize its performance, the aerial must be placed on the
highest possible position, mounted on sizable metal supports, such as
rainpipes, rails, etc, but not against them.
A cable with characteristic impedance of 50 ohm (e.g. RG58) is recom-
mended for connecting the aerial to the receiver. The length of this cable
should not exceed 10 meters.

FINAL RECOMMENDATIONS

1. Before doing any wiring or modifications to the connections, cut the
power supply.
2. Always state the model (TANGO series) clearly when ordering additio-
nal memory chips for the receivers.
3. In case of decreased transmitter range, replace battery with one ha-
ving identical specifications.
** Non-observance of the above instructions could adversely affect
the proper operation of the device.
TELCOMA S.r.l. disclaims all responsibility for any malfunctions
and/or damage caused by failure to observe the above instructions.
TELCOMA S.r.l. reserves the right to make any modifications to its pro-
ducts, at any time, as it deems proper in order to enhance its aesthetic
and/or functional characteristics.
WARRANTY
This warranty covers the product against defects in workmanship or ma-
terials.
The warranty expires automatically in case of tampering or failure to use
the product properly.
During the warranty period TELCOMA S.r.l. will repair and/or replace any
faulty components which have not been tampered with.
28