General Description - Telcoma Automations TANGO 230 Manual De Uso

GB
MODELS
TANGOR2230 Receiver with 2 outputs for 230 Vac loads
TANGOR4230 Receiver with 4 outputs for 230 Vac loads
SPECIFICATIONS
This receiver with boosted output can control loads up to 5A 230V (e.g.
lights, motors, small appliance, etc)
The receiver has impulsive type outputs with normally open and normal-
ly closed contacts, but can also operate as bistable (Step-by-Step) or as
timer, see chapter "advanced programming".
NOTE: 230 V loads (from 75 to 230 Vac) and low voltage loads (from
0 to 75 Vac) cannot be controlled on the same receiver with adjacent
outputs.
The TANGO series is a self-recognition type that uses a digital code with
over a million different combinations. The transmitters do not require
programming because the codes, which are different one from the other,
are factory set during testing.

GENERAL DESCRIPTION

Fig. 1 Receiver TANGOR2230 / TANGOR4230
Fig. 2 Transmitter TANGO 2 SLIM and TANGO 4 SLIM
Fig. 3 Transmitter opening
24