Bergstrom FLEX POWER II Instrucciones De Montaje página 28

FLEX POWER II
EN
CONDENSER
Position the condenser in the required place,
1
mark and make Ø7 boreholes if it is to be
secured with throughbolts, and Ø9 boreholes if
M6 riveted nuts are to be used.
1
Secure the unit with (4) 6/100x30 screws,
2
(8) Ø6 wide-rimmed flat washers, (4) M6/100
self-locking nuts in the case of throughbolts,
and with (4) 6/100x20 screws, (4) Ø6 grower
washers and (4) Ø6 wide-rimmed flat washers
if riveted nuts are used.
1
28