Husky F3S33VWD Manual Del Operador página 4

g Maintain tools with care. Follow maintenance instructions.
Properly maintained tools are easier to control.
g Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by
poorly maintained tools.
g Never point any tool toward yourself or others.
g Keep the exterior of the air compressor dry, clean, and
free from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean the unit.
Following this rule will reduce the risk of deterioration of the
enclosure plastic.
GENERAL SAFETY RULES
SERVICE
g Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
g Disconnect power supply, open drain valve to
decompress tank and allow water to drain, and allow
air compressor to become cool to the touch before
servicing. Turn pressure regulator knob fully c l o c k w i s e
after shutting off compressor.
g When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section
of this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk of injury.
Page 2