General Safety Rules - Husky F3S33VWD Manual Del Operador

WARNING
Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
g Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents. Floor must not be
slippery from wax or dust.
g Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
g Keep bystanders, children, and visitors away while
operating tools. Distractions can cause you to lose
control.
g Operate air compressor in an open area at least 18 in.
away from any wall or object that could restrict the
flow of fresh air to ventilation openings.
ELECTRICAL SAFETY
g Avoid body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is grounded.
g Don't expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
g Do not abuse the cord. Never use the cord to carry the
tool or pull the plug from an outlet. Keep cord away
from heat, oil, sharp edges, or moving parts. Replace
damaged cords immediately. Damaged cords increase
the risk of electric shock.
g When operating a power tool outside, use an outdoor
extension cord marked "W-A" or "W". These cords are
rated for outdoor use and reduce the risk of electric shock.
PERSONAL SAFETY
g Eye protection which conforms to ANSI specifications
and provides protection against flying particles both
from the FRONT and SIDE should ALWAYS be worn by
the operator and others in the work area when loading,
operating, or servicing this tool. Eye protection is
required to guard against flying fasteners and debris, which
could cause severe eye injury.

GENERAL SAFETY RULES

g The employer and/or user must ensure that proper eye
protection is worn. We recommend a Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses
that provide protection against flying particles both from the
front and side. Always use eye protection which is marked
to comply with ANSI Z87.1.
g Additional safety protection will be required in some
environments. For example, the working area may include
exposure to a noise level which can lead to hearing
damage. The employer and user must ensure that any
necessary hearing protection is provided and used by the
operator and others in the work area. Some environments
will require the use of head protection equipment. When
required, the employer and user must ensure that head
protection marked to comply with ANSI Z89.1 is used.
g Stay alert, watch what you are doing, and use common
sense when operating a power tool. Do not use tool
while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
g Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and
gloves away from moving parts. Loose clothes, jewelry,
or long hair can be caught in moving parts.
g Do not overreach. Keep proper footing and balance at
all times. Proper footing and balance enables better
control of the tool in unexpected situations.
g Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
g Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the tool
in unexpected situations.
TOOL USE AND CARE
g Do not exceed the pressure rating of any component
in the system.
g Protect material lines and air lines from damage or
puncture. Keep hose and power cord away from sharp
objects, chemical spills, oil, solvents, and wet floors.
g Check hoses for weak or worn condition before each
use, making certain all connections are secure. Do not
use if defect is found. Purchase a new hose or notify an
authorized service center for examination or repair.
g Release all pressures within the system slowly. Dust
and debris may be harmful.
g Store idle tools out of the reach of children and other
untrained persons. Tools are dangerous in the hands of
untrained users.
Page 1