Fujitsu SPARC M12-2S Guia De Instalacion página 212

XSCF> applynetwork
The following network settings will be applied:
bb#00 hostname
bb#01 hostname
DNS domain name
interface
status
IP address
netmask
route
interface
status
IP address
netmask
route
Continue? [y|n] : y
Please reset the all XSCFs by rebootxscf to apply the network
settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute, showsscp and
shownameserver after
rebooting the all XSCFs.
2.
Ejecute el comando rebootxscf para reiniciar el XSCF y completar la
configuración.
XSCF> rebootxscf -a
The XSCF will be reset. Continue? [y|n] : y
Si ejecuta el comando, se desconectará el XSCF.
3.
Conecte un cable LAN de Categoría 5 o superior a un puerto LAN-XSCF (A en
Figura
Guía de instalación de Fujitsu SPARC M12-2S ･ Julio de 2018
198
:scf0-hostname
:scf1-hostname
:example.com
:bb#00-lan#0
:up
:192.168.1.x
:255.255.255.0
:-n 0.0.0.0 -m 0.0.0.0 -g 192.168.1.1
:bb#00-lan#1
:down
:192.168.2.a
:255.255.255.0
:-n 0.0.0.0 -m 0.0.0.0 -g 192.168.2.1
Omitido
7-4) a través de la red de control del sistema.