2
-
Check again after 3 minutes that the pressure remains stable at 15 bar.
of gas.
2.2.9
System vacuum
service coupling of the gas line.
2.2.10
Filling the system
coolant.
2.2.11
WALL SPLIT electrical connection
insert the plug.
Before connecting the air conditioner ensure that:
air conditioner (minimum cable section of 1.5 mm
WARNING: The appliance's power network must be equipped with a suitable omnipolar disconnection device compliant
with national installation regulations. It should nonetheless be checked that the electric power supply is earthed and
equipped with suitable protection against overloads and/or short-circuits (a type 10 AT delay fuse or other devices with
equivalent functions are recommended).
out maintenance on the appliances.
2.2.12
WALL SPLIT running tests and troubleshooting
indicates the self-diagnosis function is activated.
LED A
LED B
LED C
LED D
NB:
of 3°C.
48
2
).
2