Using The On-Screen Display - Dell 1200MP Manual Del Propietário

7 Keystone adjustment If your image is not perpendicular to the screen,
Resync
8
9 Source
10 Directional keys
11 Previous Page
12 Power

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
In the Main Menu, press the
button on the remote control navigate through the tabs. Press the
the control panel or the Menu button on the remote control to select a submenu.
In the submenus, press the
button on the remote control to make a selection. When an item is selected, the
color changes to dark gray. Use the
or button on the remote control make adjustments to a setting.
To exit the OSD, go to the Exit tab and press the
or the Menu button on the remote control.
18
Using Your Projector
then it does not appear square. Press to adjust
image distortion caused by tilting the projector
(±16 degrees).
Press to synchronize the projector to the input
source. Resync does not operate if the OSD is
displayed.
Press to toggle through Analog RGB, Composite,
Component-i, S-video, and Analog YPbPr sources
when multiple sources are connected to the
projector.
Use the or button to select OSD items, use
the or button to make adjustments.
Press to go to the previous page.
NOTE:
The USB cable must be connected to
use this function.
Turn the projector on and off. For more
information, see "Turning Your Projector On" on
page 11 and "Turning Your Projector Off" on
page 11.
or button on the control panel or the
or button on the control panel or the
or button on the control panel or the
button on
button on the control panel
or
or