Connecting Stereo Microscope To The Power Supply; Switching Stereo Microscope On Or Off - Zeiss Stemi 305 Instrucciones De Manejo

ZEISS
The slight image offset which is due to the additional glass distance is taken into account on the diopter
scale by the zero position not being indicated by the white dot (Fig. 16/W), but by a red dot (Fig. 16/R).
Eyepieces with pre-inserted eyepiece plates are available directly from ZEISS.
Fig. 17 Connecting the stereo microscope
Safe disconnection from the power supply is ensured exclusively by removing the mains plug.
The switch on the stereo microscope only switches into standby mode.
Do not replace detachable mains cables by inadequately designed mains cables. Only the
specified power supply lines may be used.
22
INSTALLATION

Connecting stereo microscope to the power supply

435063-7044-010
3.4 Connecting stereo microscope to
the power supply
•
Insert the mains cable (Fig. 17/2) in the mains
supply socket (Fig. 17/1) of the stand.
•
Connect the mains cable (Fig. 17/2) to a mains
supply socket outlet.
3.5 Switching stereo microscope ON or
OFF
•
Use the power switch (Fig. 17/3) to switch the
stereo microscope ON or OFF.
Stereo microscope
Stemi 305
04/2015