Cleaning And Care - Unold 78220 Instrucciones De Uso

CLEANING AND CARE

We recommend cleaning the appliance immediately after extracting juice.
Otherwise, dried pulp remnants are difficult to remove.
Caution: The stainless steel sieve is sharp - danger of injury!
Switch off the appliance by placing the switch on "0". Wait until juice no
longer flows out and the stainless steel sieve is no longer turning.
Unplug the plug from the electrical outlet.
1. Disassemble the appliance as described in the section "Disassembly".
2. Remove the pomace from the pomace container and any pulp remaining in
the juice collection tray.
3. Clean parts (except the motor block) in warm water to which you have added
a little washing-up liquid. The sieve can easily be cleaned using a normal
dish brush made of plastic. However, only grasp the sieve on the edge, to
prevent injuries from the sharp blades. Ensure that you remove all remain-
ing pulp from the sieve to obtain high juice yields the next time you use the
appliance. If necessary, you can also soak the sieve in water before cleaning
it.
4. Yellow contaminants can easily be wiped off with a piece of paper towel
soaked in vegetable oil.
5. Wipe off the motor block with a damp cloth.
6. Wipe the drive unit with a damp cloth regularly, as well.
7. Never use any abrasive scouring agents, steel wool, metal objects, hot clean-
ing agents or disinfectants.
8. The appliance and power plug must be completely dry before the appliance
can be operated again.
9. When completely dry, store the assembled juicer in a dry, safe place so that
it is protected from dust, impact, heat and moisture.
Copyright UNOLD AG | www.unold.de
29