Cleaning And Care - Unold 78120 Instrucciones De Uso

8. Place a suitable container under
the outflow.
9. Plug the mains plug of the appli-
ance into an electrical outlet
(220–240 V~, 50 Hz).
10. Open the outflow valve, by lightly
pressing the spout downward (see
illustration).
11. Press the halved citrus fruit onto
the cone with the sliced area
downward.
12. This automatically switches the
motor on and the fruit is pressed
out. When lifting off the pressed-
out fruit the appliance switches
off.
13. Due to the motor design, the cone
does not always turn in the same
direction. Thus optimal juice yield
is ensured.
14. Do not press
because it makes the cone turn
more slowly and the motor is
excessively
results are obtained with a slow
procedure.
15. The juice flows into the juice coll-
ection container underneath the
Spout valve open

CLEANING AND CARE

Before cleaning, always turn
off the appliance and unplug it
from the electrical outlet.
1. Do not immerse the appliance in
water or other liquids and do not
wash it in the dishwasher.
2. The juice collection container,
the cones, the sieve, as well as
the cover can be cleaned in warm
water with
detergent.
18
too forcefully,
loaded. The
Spout valve closed
mild dishwashing
sieve, and when the outflow valve
is open, it flows from the juice
collection container into the ves-
sel placed under the spout. The
juice collection container is desi-
gned for a fill quantity of approx.
500 ml. If you are preparing lar-
ger quantities of juice, you must
unplug the mains plug from the
electrical socket from time to
time, then allow the juice to flow
out into a vessel and clean the
sieve.
16. After extracting the juice, push
the outflow valve upwards and
thus close it, to prevent dripping.
17. Unplug the mains plug from the
electrical outlet after use.
18. Clean the appliance after every
use.
19. Tips: We recommend that you
enjoy the pressed juice while it is
as fresh as possible. Do not store
best the juice from pressed citrus fruit
in a metallic vessel.
3. Wipe off the housing with a damp
cloth. Ensure that water does not
get into the appliance.
4. Do not use any aggressive or abra-
sive cleaning agents or scrapers.
5.
All parts must be completely dry
before using the appliance again,
or putting it away for storage.
6. Fit on the dust cover when the
appliance is not in use.