Optional Accessory - Makita DFL083F Manual De Instrucciones

Installing hook

Optional accessory

The hook is useful to hang the tool. Install the hook to
the holes on the tool body.
► Fig.13: 1. Hook 2. Hole
OPERATION
Hold the tool firmly and place the socket over the bolt or nut. Then switch the tool on. When the clutch cuts
in, the motor will stop automatically. Then release the
switch trigger.
NOTE: Hold the tool with its square drive pointed
straight at the bolt or nut, or the bolt or nut will be
damaged.
Limits of fastening capacity
Use the tool within the limits of fastening capacity. If you
use the tool beyond the limits, the clutch does not work.
And the tool cannot deliver enough fastening torque.
For model DFL083F
360°
300°
240°
2
180°
120°
60°
30°
2 3 4
1. Range of fastening capacity 2. Rotation angle
3. Torque
For model DFL125F
360°
300°
240°
2
180°
120°
60°
30°
5 6 7
1. Range of fastening capacity 2. Rotation angle
3. Torque
1
5 6 7
3
N•m
1
8 9 10 11
3
N•m
For model DFL204F
360°
300°
240°
2
180°
120°
60°
30°
8
1. Range of fastening capacity 2. Rotation angle
3. Torque
For model DFL302F
360°
300°
240°
2
180°
120°
60°
30°
16
1. Range of fastening capacity 2. Rotation angle
3. Torque
For model DFL403F
8
360°
300°
240°
2
180°
120°
60°
30°
25
1. Range of fastening capacity 2. Rotation angle
3. Torque
NOTE: The rotation angle is the angle from the point
12
that the bolt is tightened in 50% of desired torque to
the point that the bolt is tightened in 100% torque.
NOTE: Use of a cold battery cartridge may give
warning for battery capacity by LED indicator and
beeper and stop the tool immediately, even if it is fully
charged. In this case, the fastening capacity may be
inferior to the specification on this manual.
9 ENGLISH
1
10
12 14 16
3
N•m
1
20 25
3
N•m
1
30 35
3
N•m
18 20
30
40