Maintenance And Cleaning - UFESA BP4550 Manual De Instrucciones

- Connect the rod to the body of the motor and turn it in the direction indicated by the arrow (Fig. 1).
- Place the food to be prepared in the recipient and turn on the appliance. We suggest cutting the food
into cubes no more than 15 mm in size.
- For additional cleaning, disconnect and extract the rod by turning it in the opposite direction indicated
by the arrow (Fig. 1).
Do not use the appliance for more than one minute at a time. In the event of operating in cycles, allow the
appliance to rest for a period of at least one minute between each cycle.
WHISK ACCESSORY (FIG. 3):
- This accessory can be used for whisking cream, egg whites, etc.
- Connect the whisk to the whisk mechanism unit of the motor by turning it in the direction indicated by
the arrow (Fig. 3).
- Place the food in a large recipient and turn on the appliance. To achieve the best results, turn the whisk
to the right.
- Remove the whisk accessory and release it from the mechanism connection (Fig. 3)
- Note 2: Pull the whisk to release it from the mechanism' s mount.
CHOPPING ACCESSORY (FIG. 4):
This accessory can be used to chop up vegetables, meat, etc.
- Place the food to be prepared into the recipient for it to be cut with the blades inside and close the lid tight.
We suggest cutting the food into the appropriate forms and sizes. E.g. cut meat into 2 cm x 2 cm x 6 cm
strips, cut onions into 4 to 6 discs, etc.
- Place the adaptor into the motor unit by turning it in the direction indicated by the arrow.
- Attach the unit to the cover and turn on the appliance (be careful: do not turn on the appliance if the
whole unit has not been properly installed and connected).
- Turn off the appliance when the food has reached the desired texture.
- Remove the unit from the lid and release the adaptor.

MAINTENANCE AND CLEANING

Unplug the power cable before cleaning.
Do not touch the blade.
Use a dry kitchen cloth to clean the product. It is strictly forbidden to rinse the main unit with water or
immerse it in water.
Do not use metal or nylon brushes, abrasive household products, thinners or other similar cleaning pro-
ducts to clean the appliance as they can damage its surface structure.
Use a soft, dry cloth to remove any dirt from the power cable.
16