All returned goods are subject to a 20% handling/restocking fee. All returns must be returned in their original
packaging and within thirty (30) days from the shipping date.
SKYFOOD reserves the right to change the design and specifications of its equipment or any related
documentation at any time. The end user is not entitled to upgrades nor refunds resulting from these
changes.
Updates
These Terms and Conditions were last updated on February 02 , 2010.
SKYFOOD'S LIMITED WARRANTY
All new products FLEETWOOD BY SKYMSEN, sold by SKYFOOD EQUIPMENT, LLC. ("SKYFOOD"), for use
only in the continental Unites States (collectively, "Products" or singularly, "Product"), are warranted to be free
from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original
purchaser/user ("End User"). No warranty is given or implied to a subsequent transferee or any other third party.
This warranty is expressly conditional upon SKYFOOD being notified of any defects in materials or workmanship
within five (5) days of its occurrence, within the warranted time period. If a notice of a claim under this warranty is
timely made by the End User, SKYFOOD or a designated service company ("Service Company"), will repair the
Product or replace the part which is defective, subject to the additional conditions hereinafter described.
This warranty shall not apply if damage occurs from improper installation, wrong voltage, nor to the extent that
Products or parts have been used other than in conformance with operating and maintenance instructions,
subjected to misuse or abuse or damaged by accident, acts of God, abnormal use or stress or any other matter
unrelated to SKYFOOD, and beyond its reasonable control. In addition, this warranty does not cover normal
wear and tear of certain items, such as, but not limited to, blades, stones, chopper cutting knives, plates, slicing
knives, cutting disc, gaskets, oil changes, sealing tape, heat seal wires, worm gears, and other parts expendable
by nature and that need to be replaced frequently. THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY,
EXPRESS OR IMPLIED WARRANTIES WHICH MAY BE APPLICABLE TO SKYFOOD, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE. Under no circumstances shall SKYFOOD be liable for loss of use, revenue or profit or for incidental
or consequential damages. The sole and exclusive remedy for breach of any warranty is limited to the
remedies provided in the paragraph above.
Products weighing less than seventy (70) lbs. must be taken or shipped, shipping charges prepaid, either to
SKYFOOD's facility or a SKYFOOD's designated service company ("Service Company"). SKYFOOD offers a
limited on-site warranty only for Products whose weight exceeds seventy (70) lbs., provided they are
installed in a location that is within a thirty (30) mile radius of a Service Company. In this case, warranty
services will be provided during regular business hours.
This warranty shall not take effect unless and until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIPMENT, LLC, within thirty (30) days from the date
of purchase. The WARRANTY REGISTRATION is available either in the Instruction Manual of every Product or
at SKYFOOD's website
www.skyfood.us
. The End User must fulfill the WARRANTY REGISTRATION form and
send it to SKYFOOD according to the instructions posted on the referred website. Failure to do so will void the
warranty.
nd
1.3 Technical Characteristics
1.3.1 Specification.
Model SS-300/A: it is an automatic slicer. The Movable Carriage moves
automatically.
Characteristics
Unit
Voltage
Frequency
Power Rating
Consumption
Height
Width
Depth
Net/shipping Weight
Movable Carriage
Knife Diameter
(*)
The frequency and the voltage will be only the rated motor ones.
(**) Use the Voltage Selector Switch , to change the voltage in accordance with
the electricity supply voltage .
2. Installation and Pre-Operation
2.1 Installation
The Automatic Vertical Slicers have non-skid feet. Install them onto a leveled and
stable surface, preferably approximately 850 mm above floor.
Before plugging in the machine check if power supply voltage and machine voltage are the same.
The Voltage Selector Switch is located inside the machine Base Nº03 (Picture – 01), to reach it just
remove the rubber plug beside the cord . If necessary change the voltage to meet power supply
voltage .
Model SS-300Adoes not have any voltage selector switch Ground the machine
properly. The plug has two pins and a grounding wire, the three of them have to be properly
connected.
2.2 Pre operation
Check if your Slicer is firm in its position. Before using it clean all parts that get in
contact with food with a damp clean cloth. Be careful to follow the item 1.1 safety instructions .
Table - 01
SS-300
SS-300A
[V]
110 / 220(**)
110 or 220
50 or 60 (*)
50 or 60 (*)
[Hz]
[HP]
0,75
0,75
[kW/h]
0,55
0,55
[mm]
495
550
[mm]
605
638
[mm]
590
600
[kg]
28/31
37/41
[mm]
230x350
230x350
[mm]
300
300
04