Manutención; Procedure For Sharpening Knife; Análisis Y Solución De Problemas; Problemas , Causas Y Soluciones - Skymsen Fleetwood SS-300/A Manual De Instrucciones

Cortadoras de fiambres inclinada
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4.5
Después de Terminar el Trabajo
4.5.1
Cuidados
Siempre limpie la maquina para tanto , desconetarla de la toma de corriente .
Nunca limpie la maquina antes de su PARADA COMPLETA.
Recoloque todos los componentes de la maquina en sus lugares , antes de prenderla otra vez.
Al verificar la tensión de las correas, NO coloque los dedos entre las correas y las poleas.
4.6
Manutención
4.6.1
Peligros
Con la maquina prendida cualquier operación de mantenimiento es peligrosa .
DESLÍGUELA FÍSICAMENTE DE LA RED ELÉCTRICA , DURANTE TODA LA OPERACIÓN
DE MANTENIMIENTO .
4.6.2
Aviso
El mantenimiento eléctrico o mecánico debe ser hecho por una persona calificada para hacer
este trabajo .
La persona encargada por el mantenimiento debe certificarse que la maquina trabaje bajo
Condiciones TOTALES DE SEGURIDAD .
5 Análisis y Solución de Problemas
5.1

Problemas , Causas y Soluciones

Las Cortadoras de Fiambres Inclinada , fueran diseñadas para que necesiten un mínimo de
mantenimiento . Sin embargo pueden ocurrir algunas irregularidades en su funcionamiento, debido
al desgaste natural causado por su uso .
Caso haya algún problema con su maquina , verifique la Tabla – 02 abajo , donde están indicadas
algunas soluciones recomendadas .
23
Picture - 16
3.6 Procedures For Sharpening Knife
The Food Slicers have their own sharpener , easy to employ and efficient . To use it
follow the below instructions :
* With the ON/OFF Switch , switch the machine OFF .
* Withdraw the Movable Carriage and the Frontal Protection .
* Clean the Knife with alcohol
* Switch ON the machine and with the knife running , press the button No.01 (Pict.18) until the
grindstone gets to contact the knife and keep the pressure for about 2 or 3 seconds .Repeat such
pressure three times .
* To finish the sharpening operation , press the button No.02 (Pict.18) during 2 or 3 seconds to
clean the edge .
Such operation has to be hold for only 2 or 3 seconds with the knife on movement .
Picture - 18
Picture - 17
Disassembled Movable Carriage for
cleaning .
IMPORTANT
01
08
02
Tabla de contenido
loading

Tabla de contenido