Reassembly Of Mixer System; Removing The Espresso Group - Expobar Brilliance Manual De Usuario

16.3 Reassembly of mixer system

7. Reassemble the assembly plate
by turning
lock knob (F) clockwise.
INSPECT gaskets.
INSPECT
INSPECT
10.Assemble mixer bowl and
steam
trap (J) see picture. Pay attention
to the steam trap to be well
oriented towards its hole in the
chasis.
(J)
(J)
(J)

16.4 Removing the espresso group

To remove the espresso group follow the following steps:
8. Make sure that the motor
whippers plane side will be in
accordance with the whippers
plane side. see next (G) and
picture (H)
.
11. Easily push the mixer bowl
towards, according to (K) and
lock with lock knob (L).Connect
outlet hose (M). (NOTE! make
sure that all water hose are
connected at right place
(K)
(M)
(L)
47
• Hygiene and maintenance
9. Assemble whipper , pull
until you hear a clicking
noise. (H).
(H)
English