Screw Driver Safety Warnings; Additional Safety Warnings; Standard Accessories - HIKOKI W 6VM Instrucciones De Manejo

5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.

SCREW DRIVER SAFETY WARNINGS

○ Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
2. Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the power
switch is in the ON position, the power tool will start
operating immediately, which could cause a serious
accident.
3. When the work area is removed from the power source,
use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
4. Ensure that the Screw Driver is held truly perpendicular
to the head of the screw.
If held at an angle, the driving force will not be fully
transferred to the screw, and the screw head and/or hex-
socket will be damaged. Hex-socket rotation stops when
pushing force is released.
5. Never change the direction of hex-socket (or bit holder)
rotation while the motor is running. To do so would
seriously damage the motor. Turn the power switch
OFF before changing the direction of hex-socket (or bit
holder) rotation.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
W6VM / W6V4 / W6VA4 / W6VB3 / W8VB2 :
Screw Driver
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/
EU on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V
Rated voltage
P
Power Input
n
No-load speed
0
Switching ON
Switching OFF
On / Off switch lock-on
Disconnect mains plug from electrical outlet
Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ No. 2 Plus bit (W6VM, W6V4, W6VA4) ........................1
○ Magnetic hex socket (H= 10 mm) (W6VB3, W8VB2) ...1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tightening hex-head screws.
○ Tightening drywall screws, wood screws and self-drilling
screws.
3
English