Stop Treatment - ResMed S8 Escape Manual Del Usuario

2
Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.
CAUTION
!
Do not leave long lengths of air tubing around the top of your bed. They could
•
twist around your head or neck while you are sleeping.
Make sure the area around the flow generator is dry and clean. It should also be
•
clear of bedding, clothes, and other potential blockages.
3
Alter the ramp time if required (see "How to Change the Ramp Time" on page 17).
4
To start treatment, press the Start/Stop key.
5
Fit your mask as described in the mask user instructions.
WARNING
!
A mask should not be used unless the S8 Escape device is turned on and operating
properly.
6
When ramping begins the LCD will display the word "RAMPING", with the current
pressure indicated as dashes. Each dash is approximately equivalent to 2 cm H
example, 6 dashes represents approximately 12 cm H
S T
TOP REATMENT
To stop treatment at any time, remove your mask and press the Start/Stop key.
12
O pressure.
2
O. For
2