Sony PMS-500P Manual De Instrucciones página 41

CAM SEL (Camera Select)
You can select which pictures are displayed from the
cameras connected to the VIDEO IN (1 – 8) or EXT
VIDEO IN (9 – 256) connectors.
When you select CAM SEL, the system checks
whether or not the MODE SWITCH in the PICTURE
menu is set to QUAD. If the MODE SWITCH is set to
QUAD, the following screen appears.
(The illustration below is for selecting LOCAL CAM
SEL.)
L O C A L C A M E R A S E L E C T
C A M E R A S E L E C T
Q U A D S E L E C T
< E X I T > < O K >
1
Select from the CAMERA SELECT and QUAD
DISPLAY, then move the cursor to <OK> and
press ENTER. The following screen appears.
(The illustration below is for selecting LOCAL
CAM SEL.)
L O C A L C A M E R A S E L E C T
N O : [ 0 0 1 ]
0 1 2 3 4 5 6 7 8 9 BS
< C A N C E L > < O K >
2
Enter a camera number in NO:[ ], then move the
cursor to <OK> and press ENTER.
Notes
• If you select the camera while the camera tour is
operating, the camera tour stops temporarily. Then
the picture from the camera that you have selected is
displayed.
Select the same camera to return to the camera tour.
• When the PRE/POST ALARM REC KIND in the
ALARM menu is set to PRE-ALARM or POST-
ALARM, or when the MODE SWITCH in the
PICTURE menu is set to QUAD, the camera numbers
defined as follows.
Camera number PRE ALARM POST ALARM QUAD
250 QUAD
251 TIME –
252 TIME 0
253 TIME +
254 TIME ++
For details on PRE/POST ALARM, see "PRE/POST
ALARM REC" on page 2-12 (GB).
CAM CTR (Camera Control)
You can adjust the picture (zoom, pan, tilt, focus and
iris).
(The illustration below is for selecting LOCAL CAM
CTR.)
L O C A L C A M E R A C O N T R O L
< + > Z O O M < - >
B b
< > P A N < >
V v
< > T I L T < >
< + > F O C U S < - >
< + > I R I S < - >
I N T E R V A L : 5 0 0 m s e c
To adjust the zoom
Select <+> or <–> next to ZOOM.
To adjust the angle
Select <B> or <b> next to PAN or select <V> or <v>
next to TILT for the desired angle.
To adjust the focus
Select <+> or <–> next to FOCUS.
To adjust the iris
Select <+> or <–> next to IRIS.
To adjust the interval of operations
Select 20msec, 50msec, 100msec, 200msec or
500msec in INTERVAL.
QUAD QUAD
TIME 0 U-LEFT
TIME 1 U-RIGHT
TIME 2 L-RIGHT
LIVE L-LEFT
< E X I T >
3-5
Chapter 3 Operation (GB)