Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USING THE TFT MONITOR
Open/Close TFT Monitor
Open TFT Monitor
Press the OPEN button (1) on the front panel or press the
(
) button (31) on the remote control to activate the
mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button (1) on the front panel or press the
(
) button (31) on the remote control to load the display
panel back into the compartment.
TFT Monitor Auto Open
If "TFT Auto Open" is "on" when the unit is turned on, the
monitor automatically moves to the viewing position.
If "TFT Auto Open" is "off" when the unit is turned on, press
the OPEN button (1) or (
) button (31) on the remote
control to move the monitor into the viewing position.
If "TFT Auto Open" is set to "Manual", the TFT will not close
when the key is turned off.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the
display in relationship to the viewing angle. The monitor
angle can be adjusted for optimum viewing using one of the
following methods:
Step by Step Angle Adjustment
•
Press the (
) or (
) button on the remote control to
adjust the tilt angle of the screen one step at a time.
•
Press the TILT - (5) or TILT+ button (6) on the monitor to
adjust the tilt angle of the screen one step at a time.
Continuous Angle Adjustment
•
Press and hold the (
) or (
) button on the remote
control to adjust the tilt angle in a continuous motion.
•
Press and hold the TILT - (5) or TILT+ button (6) on the
monitor to adjust the tilt angle in a continuous motion.
Aspect Ratio
Press the DISP button (10) on the remote control or WIDE
button (4) on the monitor to adjust the aspect ratio as follows:
FULL
The entire screen is extended
horizontally to the aspect ratio of 16 to
9. The extension ratio is the same at
any point.
NORMAL
The conventional display image has a
4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
Image/Display Settings
Table 2 shows the video output mode for each playing
source.
Table 2: Video Output Modes
Playing Source
Video Output Modes
AM/FM TUNER
RGB Mode
DVD
RGB Mode
AUX IN
CVBS Mode
*CVBS – Composite Video Baseband Signal
Parameter Adjustment Procedure
To adjust monitor display settings, perform the floowing
steps:
1.
Enter Picture Quality Setting Mode:
Press the PIC button (22) on the remote control or mon-
itor (2).
2.
Select Item to Set:
Press the rotary encoder (11) on the control panel to
select "BRIGHT", "CONTRAST", or "COLOR".
3.
Set Parameters:
Press the VOL +/– buttons (13, 14) on the remote or
turn the rotary encoder (11) on the control panel to
adjust the selected parameter.
4.
Exit Picture Quality Setting Mode:
Press the PIC button (22) on the remote control or
monitor (2).
8
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle
Parking Brake circuit, the front TFT monitor will display video
when the Parking Brake is engaged. (When the pink wire is
grounded via the Parking Brake circuit, video will be
displayed.)
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following
protective measurements can be executed to prevent
damage to the mechanism or monitor:
Table 3: Monitor Protective Measures
Self
OPEN Button
Obstruction
Protection
Pressed
Monitor
Monitor is
Monitor fully
loading out
automati-
extended
horizontally
cally loaded
horizontally
into unit
Monitor
Unit stops at
Monitor fully
loading in
obstruction
extended
horizontally
point
horizontally
Monitor
Unit stops at
Monitor
loading out
obstruction
swivels back
vertically
point
to the unit
Monitor
Unit stops at
Monitor
loading in
obstruction
swivels back
vertically
point
to the unit
After the protective procedure is executed, normal operation
is resumed by pressing the OPEN button (1) or disconnecting
and reconnecting the power.
UV9
Power
Reconnected
Monitor is
automati-
cally loaded
into unit
Monitor is
automati-
cally loaded
into unit
Monitor swiv-
els back to
the unit
Monitor swiv-
els back to
the unit
Tabla de contenido
Solución de problemas
