Tabla de contenido
Idiomas disponibles
Idiomas disponibles
UV9
OPERATING INSTRUCTIONS
Power On / Off
Press the
/SRC button (10) on the unit (or the
on the remote control) to turn the unit on. The buttons on the
front of the unit light up and the current mode status appears
in the LCD (7). You can also turn on the unit by pressing the
OPEN button (1) and opening the TFT screen.
Press and hold the
button to power off the unit.The monitor
is drawn back into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The
Beep tone can be disabled through the Setup menu.
Mute/Line Mute
Press the MUTE button (8) on the front panel or the MUTE
button (3) on the remote to mute the volume from the unit.
Press the MUTE button again to restore the volume. "MUTE"
is displayed on the LCD. Adjusting the volume or using any of
the audio setup features cancels the mute function.
If the "MUTE" wire is connected, audio output mutes when a
telephone call is received by the car phone or when verbal
navigation is performed.
Playing Source Selection
When the monitor is closed, press the SRC button (10) on the
front panel or remote control (8) to change between available
audio playing sources in the following order: AM/FM, DISC,
USB and AUX IN. The mode is displayed on the LCD screen.
Source Menu
You can also use the touch screen to change the source
through the SOURCE MENU. To access the SOURCE
MENU, touch the top left corner of the screen or press the
SRC button (10).
SOURCE MENU
RADIO
DISC
RADIO
NAVI.
AUX
Touch the DISC, RADIO, USB, NAVI, AUX or CAMERA
button to select the corresponding source.
button (4)
External Devices
External peripheral devices, including a game console,
camcorder, navigation unit, iPod, Zune, etc. can be
connected to this unit via RCA output using an A/V Media
Adapter Cable (not included).
A / V
INPUT
Connect the external device to the A/V Media Adapter Cable
and then plug the cable into the A/V INPUT connector (13) on
the front of the radio. Select "AUX" or "AUX IN" (when
monitor is closed) mode to access auxiliary devices. You
cannot directly control external devices connected to the A/V
INPUT.
Skin Selection
Touch the SKIN button, located in the bottom right corner of
the SOURCE MENU (see "Source Menu" on page 9), to
choose an alternate background image for the touch screen.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary
encoder (11) on the front panel or press the VOL-/+ buttons
(13, 14) on remote control. When the volume level reaches
"0" or "40", a beep sounds, indicating that the adjustment limit
has been reached. The LCD or TFT screen displays the
volume level for 3 seconds.
Programmable Turn-On Volume
USB
This feature allows the user to select a turn-on volume setting
regardless of the volume setting prior to turning the unit off.
To use this feature, the TFT monitor must be displayed.
CAMERA
To program a specific turn-on volume level, turn the rotary
encoder (11) to adjust the volume to the desired turn-on
volume. Push and hold the rotary encoder while the yellow
SKIN
speaker icon and level indication is displayed on the screen.
The unit will beep to confirm your turn-on volume setting.
Audio Control Menu
The Audio Control feature allows you to easily adjust your
audio system to meet the acoustical characteristics of your
vehicle, which vary depending on the type of vehicle and its
measurements. Proper setting of the Fader and Balance
boosts the effects of the cabin equalizer.
Press the rotary encoder (11) on the front panel to display the
audio menu.
•
Right Audio
1
•
Left Audio
2
Ground
3
Video
4
3.5mm A/V Cable (not included)
EQ
BASS
MID
TREBLE
SUB
FAD
BAL
NOTE: The EQ mode will automatically change to
"USER" when individual audio functions are adjusted.
9
Use the touch screen +/- buttons to adjust the settings
for an audio feature.
To adjust an audio feature using the remote control,
perform the following steps:
a.
Press the (>>|)/(|
) buttons (17, 15) to highlight
<<
the audio feature to be adjusted.
b.
Press the >/|| button (16) to select the highlighted
option.
c.
Press the |<<, >>|, >>, or << buttons (12, 15, 17,
20) on the remote control to adjust the selected
feature to the desired setting.
Table 4: Audio Adjustments
Audio Function
Adjustable Range
User
Acoustic
Urban
Rave
Latin
Dance
Hip Hop
Rock
-14 to +14
-14 to +14
-14 to +14
-14 to 0
Grid
Grid
Tabla de contenido
Solución de problemas
