Using The Front Panel; Removing The Front Panel - Jensen MP1314 Manual Del Propietário

2. To fasten the unit to the factory radio mounting brackets. Align the screw
holes on the bracket with the screw holes on the unit and then tighten the
screws (5x5mm) on each side.
Note: The outer trim ring, sleeve and the metal strap are not used for method B
installation.

USING THE FRONT PANEL

Removing the front panel

1. Press the release button on the front panel and remove the front panel.
2. When the panel is removed, store the panel in the protective case.
Installing the front panel
To install the front panel, insert the panel into the unit housing and make sure
the panel is properly aligned. If the panel is not installed correctly the unit may
malfunction or some keys may not function properly.
8
MP1314