Specifications; Supplied Accessories - Sony RM-IP10 Manual De Instrucciones

Specifications

Input/output connectors
Control input/output
VISCA RS-232C OUT: Mini DIN 8-
VISCA RS-422: 9-pin type
TALLY IN/CONTACT OUT: 9-pin
LAN: RJ-45 (8-pin), 10BASE-T/
Control signal format (for RS-232C/RS-422
9,600 bps/38,400 bps
Data: 8 bit
Stop bit: 1
Power connector
JEITA type4 (DC IN 12V)
General
Input voltage 12 V DC (10.8 to 13.2 V DC)
Current consumption
0.3 A max. (at 12 V DC), 3.6 W
Operating temperature
0 ºC to 40 ºC (32 ºF to 104 ºF)
Storage temperature
-20 ºC to +60 ºC (-4 ºF to 140 ºF)
Dimensions 391.3 mm × 165 mm × 145.9 mm
(15
Mass Approx. 950 g (2 lb 15 oz)

Supplied accessories

MPA-AC1 AC power adaptor (Sony) (1)
AC power cord (1)
CD-ROM (1)
RS-422 connector plug (attached to the unit) (2)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
22
GB
Specifications
pin type
type
100BASE-TX automatically
detected
communication)
1 1
/ inches × 6 / inches ×
2 2
3
5 / inches) (w/h/d)
4
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.