Radio Operation; Alarm Function - AEG SRC 4331 Instrucciones De Servicio

ENGLISH
42
5. Press once the / BAND button (5) to the
playback while retaining the program.
6. To delete the program, press the / BAND
button (5) twice.
NOTE:
• Do not use irregular shaped CDs (example:
heart-shaped, octagonal ones). It may result
in malfunctions.
• Do not place more than one disc in the disc
compartment.
• Do not try to open the disc compartment dur-
ing playback. • Do not touch the lens. Doing so may cause
malfunctions.
• If a disc is incorrectly inserted - or no disc
has been inserted - the symbol "Cd" and the
word "no" appear in the display.
• Playback of CDs produced by the user can-
not be guaranteed due to the large variety of
software and CD media available.
Playing back Music in MP3 Format
With this device it is possible to play back pieces
of music in MP3 format. The device also supports
all standard CD types: CD, CD-RW, CD-R.
This device is able to play MP3 CDs. Up to 999
tracks can be compressed and stored on these
CDs. Your machine detects an MP3 CD auto-
matically (the total number of tracks and MP3s
appears in the display). If you would like to play
one of these CDs, proceed as described under
„CD operation". Tracks can be programmed as
described under „Programmed Play".
Please note:
There are a number of different recording and
compression methods, as well as quality differ-
ences between CDs and self-recorded CDs.
Furthermore, the music industry does not adhere
to fixed standards (copy protection).
For these reasons it is possible that in rare cases
there are problems with the playback of CDs and
MP3 CDs. This is not a malfunction of the device.

Radio Operation

• Press the POWER ON/OFF button (16) to
switch the device on.
• Press the / BAND button (5) repeatedly till
FM or AM is shown on the display.
FM (MHz) = Very High Frequency,
AM (KHz) = Medium Wave
• Tune the program by turning the TUNING
wheel (8). The display will show the radio
frequency and, to the left, the radio band.
• The stereo control lamp (in the display) is
illuminated only when the selected program is
received in stereo quality. If the signal is too
poor and noise in the received program, it will
flicker. Try to improve reception by turning and
unrolling or rolling the antenna up.

Alarm Function

Setting the Timer
1. Make sure the unit is power off.
2. Press the ALARM ON/OFF button (18) to turn
the ALARM on and the ALARM will appear in
the display.
3. Press the MODE/ALARM button, then repeat-
edly press the DIR- (6) or
ton to set the desired hour time.
4. Press the MODE/ALARM button again, then
repeatedly press the
button to set the desired minute time.
5. Press the MODE/ALARM button once more,
then repeatedly press the
DIR+ (7) button to cycle through the follow
options: tU/CD/USB/BU, and select the de-
sired mode.
To Check the Alarm Time
Press the MODE/ALARM button, the preset alarm
time will be displayed.
Buzzer Alarm
1. Make sure the BU ALARM was selected.
2. When the preset ALARM time comes,
BUZZER will appear in the display and the
buzzer sound will be audible. To stop the
buzzer sound, press ALARM ON/OFF button
to OFF.
Radio Alarm
1. Make sure the tU ALARM was selected.
2. When the preset ALARM time comes, the unit
will enter RADIO mode and play automati-
cally.
CD Alarm
1. Make sure the CD ALARM was selected.
2. When the preset ALARM time comes, the unit
will enter CD mode and play automatically.
USB Alarm
1. Make sure the USB ALARM was selected.
2. When the preset ALARM time comes, the unit
will enter USB mode and play automatically.
DIR+ (7) but-
DIR- (6) or DIR+ (7)
DIR- (6) or