Special Safety Information; Location Of Controls - AEG SRC 4331 Instrucciones De Servicio

ENGLISH
40

Special safety information

This device works with a
class 1 laser.

Location of Controls

1 PHONES
2 VOLUME control
3 DISPLAY button
4 PLAY/PAUSE button (►/II)
5 STOP/ BAND button ( / BAND)
6 DIR- button (search bwd)
7 DIR+ button (search fWd)
8 TUNING control
9 USB socket
10 SNOOZE/LIGHT button
11 CD door
12 DISPLAY
13 FUNCTION (CD/USB/RADIO) switch
14 MODE/ALARM button
15 SLEEP button
16 POWER ON/OFF button
17 PROG./CLOCK SET button
18 ALARM ON/OFF (CD/USB/BUZZER/RADIO)
switch
19 BACK UP Battery compartment
First Use of the Device/
Introduction
• Before the first use of the device, read the user
manual carefully.
• Select a proper place for the device such as
a dry, and even non slip area where you can
easily operate the device.
• Make sure the device is vented sufficiently.
• If still in place, remove the protection foil from
the display.
Power supply
• Insert the mains plug into a properly installed
socket with 230V, 50Hz.
• Make sure the grid voltage corresponds to the
figures on the rating plate.
Inserting the batteries
(Batteries are not included with the device)
In case of a power cut or if the device is un-
plugged, with batteries inserted, the settings will
be kept.
1. Open the battery case on the bottom of the
device.
2. Insert 2 R03 "AAA" batteries 1.5V. Mind the
correct polarity (indicated on the bottom of
the battery case).
3. Close the battery case.
4. If the device is not used for an extended
period of time, remove the batteries from the
device to avoid any leaking of battery acid.
CAUTION:
• Never use different battery types or new and
used batteries together.
• Batteries must not be disposed of in the
garbage. Please bring used batteries to
competent collection centers or back to the
dealer.