Manual Operation (Cool, Dry, Fan) - Mitsubishi Electric Mr.Slim MCF-18TN Manual De Instrucciones

MANUAL OPERATION (COOL, DRY, FAN)

˚C
CLOCK
AMPM
AMPM
TOO TOO
ON/OFF
WARM COOL
FAN STOP
I FEEL COOL
VANE START
FAN DRY
MODE HR.
ECONO COOL MIN.
RESET CLOCK
To select the "COOL", "DRY" or "FAN" mode:
ON/OFF
1
Press the button.
2
Select the operation mode by pressing the
MODE
button.
Each time this button is pressed, the operation mode
(I FEEL...) →
is changed in sequence : (COOL)
→ (DRY) →
(FAN)
To stop operation:
I
ON/OFF
Press the button.
After the operation mode is set once, the operation
starts in the same mode as the one set previously from
the next time by simply pressing the button.
ON/OFF
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
I
When the set temperature is to be
changed:
TOO
WARM
• Press the button to lower the tempera-
ture.
One press lowers the temperature by about 1°C.
TOO
• Press the COOL button to raise the tempera-
ture.
One press raises the temperature by about 1°C.
In "DRY" operation
• The temperature control (temperature setting)
cannot be done.
• The room temperature is slightly lowered in
this operation mode.
Note:
When the ambient temperature is too high,
the room temperature may not reach the set
temperature since the unit operates to cool
under high load.
I
The details of the display on the indoor
unit are explained on page 6.
CONVENIENT INFORMATION
"COOL" For effective cooling
1 Close the windows and pull down 2 Paste a heat shield film (generally
blinds. Sunlight is reduced and available) on the window. Heat en-
cooling efficiency increases. tering the room is reduced.
"
DRY" The humidity at which people feel comfortable
When air contains too much moisture, people feel uncomfortable. Humidity is related to temperature and wind. The humid-
ity at which people feel comfortable is 60%-75% RH. in summer, 55%-70% RH. in winter.
3 Block the outdoor unit from direct
sunlight. This saves energy.
7