I Feel - Mitsubishi Electric Mr.Slim MCF-18TN Manual De Instrucciones

"I FEEL..." AUTO OPERATION
With the " (I FEEL...)" auto operation mode, the
optimum room condition can be set automatically
with a one-touch operation.
˚C
CLOCK
AMPM
AMPM
TOO TOO
ON/OFF
WARM COOL
FAN STOP
I FEEL COOL
VANE START
FAN DRY
MODE HR.
ECONO COOL MIN.
RESET CLOCK
6
To start operation:
I
ON/OFF
Press the button.
When the " (I FEEL...)" mode is selected, the air
conditioner is automatically controlled at the optimum
temperature.
To stop operation:
I
ON/OFF
Press the button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
If you feel slightly warm,
I TOO
WARM
Press the button to lower the tem-
perature.
One press lowers the temperature by about 1°C.
If you feel slightly cool,
I TOO
COOL
Press the button to raise the tem-
perature.
One press raises the temperature by about 1°C.
MODE
When " (I FEEL...)" is not selected, press the
button until it is set.
Each time the button is pressed, the operation mode is
(I FEEL...) → (COOL) →
changed in sequence :
(DRY) →
(FAN)
FAN STOP
I FEEL COOL
VANE START
FAN DRY
MODE HR.
ECONO COOL MIN
Description of "I FEEL..." mode
Details of operation
According to the room temperature when the operation
starts, the operation mode is automatically set to either
COOL or DRY. However, when operation is started again
within 2 hours after it is stopped, the same operation mode
before the operation is stopped is selected. The operation
mode selected first is not changed even if the room tem-
perature changes. If the operation mode does not match
the room condition, select the appropriate operation mode
MODE
by pressing the button.
Details of auto operation
Room temperature Operation mode Target temperature
when started (initial state)
About 25°C or higher COOL About 24°C
About 25°C or lower DRY —
Note:
When both Operation Indicator lamps are lighting, as
the air conditioner is operating to reach the target tem-
perature, the set temperature may not be changed. In
this case, please wait until the lighting of Operation In-
dicator lamp changes from two to only one and then
change the set temperature.
Details of display on the indoor unit
The Operation Indicator lamps at the right side of the in-
door unit indicate the operation state.
Operation Indicator
Lighted
Not lighted
Operation Indicator lamp
Difference between
Indica-
target temperature
Operation state
tion and room
temperature
This shows that the air condi-
tioner is operating to reach the
About 2°C or
target temperature. Wait until
more
the target temperature is ob-
tained.
This shows that the room tem-
About 2°C or
perature is approaching the
less
target temperature.